Globrite Color Changing Led Pool Light Overview; Operating Globrite Color Lights Using A Wall Switch; Operating Globrite Color Lights Using An Automation Control System; Using And External Transformer For Multiple 12 Vac Globrite Color Lights - Pentair GLOBRITE Installation And User Manual

™
GloBrite Color Changing LED Pool Light Overview
This manual describes how to install and replace the GloBrite™ Color LED light for pool
and spa. GloBrite Color LED lights provide brilliant vivid multi-colors with spectacular
effects for your pool. The energy efficient colored array utilizes IntelliBrite
Light technology and can cycle through colors at varying speeds and in different
sequences of color. Choose one of the seven pre-programmed color light shows or
select one of the five fixed colors to create virtually endless range of dramatic underwater
lighting effects for a spectacular effect in your pool and spa.
Operating GloBrite Color LED Lights Using a Wall Switch
The GloBrite color light can be manually controlled using a standard wall-mount light
switch. Multiple GloBrite color lights can be connected via a junction box and a 12 VAC
isolation transformer to a single switch so that all lights can be switched on and off
together. For wiring diagram, see page 14.
Operating GloBrite Color LED Lights Using Automation Control System
GloBrite color lights can also be automatically controlled using the Pentair IntelliTouch
Control System and the EasyTouch
information refer to the IntelliTouch Control System User's Guide (P/N 521075),
EasyTouch Control System User's Guide (P/N 521044), and SunTouch
User's Guide (P/N 520785).
Using an External Safety Isolation Transformer for Multiple 12 VAC GloBrite
Color Lights
When using multiple GloBrite 12 VAC color lights on a 100 Watt safety isolation
transformer, it is recommended that no more than three (3) GloBrite color lights be used.
For long cable lengths with a single light, It is recommended not to exceed 150 feet
(45.72 m) of total cable run between the 12 VAC isolation transformer and the GloBrite
color light.
100 Watt
Transformer
Maximum Wattage Using Multiple GloBrite Color LED lights
(with a 300 Watt Isolation Transformer)
IMPORTANT! When using multiple 12 VAC Pentair
total allowable light wattage is 300 Watts maximum. The individual light wattage is as
follows:
• One GloBrite Color LED Pool light is 23 Watts maximum
• One AmerBrite White LED (500W) pool light is 51 Watts maximum
• One AmerBrite White LED (400W) pool light is 44 Watts maximum
• One AmerBrite White LED (300W) pool light is 36 Watts maximum
• One AmerBrite Color LED pool light is 36 Watts maximum
• One IntelliBrite Color LED pool light is 30 Watts maximum
• One IntelliBrite Color LED spa light is 18 Watts maximum
®
Control System (see page 14). For more
12 Gauge
J Box
(minimum)
150 ft.
GLOBRITE™ Color Changing LED Pool/Spa Light Installation and User's Guide
Note: If a longer cable run
is necessary, it is
recommended that
separate 100 Watt safety
isolation transformers be
used for each light with no
more than 150 feet of total
cable run between the
transformer and lights.
®
LED white pool and spa lights the
®
Color LED
®
® Control System
1