Related Manuals for Abtus AV813
Summary of Contents for Abtus AV813
- Page 1 Universal Projector Ceiling Mount ABtUS SIGAPORE PTE LTD www.abtussingapore.com Model: AV813 Patent Pending Revision 0 ABtUS SINGAPORE PTE LTD www.abtussingapore.com...
-
Page 2: Important Notes
User Operation Guide IMPORTANT NOTES ● Thank you for purchasing the Universal Projector Ceiling Mount. This bracket is suitable for about 80% to 90% of projectors up to load of 20kg (44 lbs) ● To ensure correct usage, please read this instruction manual thoroughly. Keep this manual for future reference. -
Page 3: Parts Specifications
PARTS SPECIFICATIONS *Specifi cations are subject to changes without notice. -
Page 4: Package Contents
User Operation Guide PACKAGE CONTENTS Assembling without the correct use bolts and screws at designated points may result in injury and damage to properties or the unit collapsing from its installed position. All bolts and screws must be used as per installation instructions. - Page 5 WARNING Do not place on sloping surface Strictly install on a horizontal surface only. Keep the room well ventilated to prevent room temperature rising and possibilities resulting in fi re. Ensure the Projector is mounted so that it is not possible for undue load to be put on the bracket.
-
Page 6: Component Checklist
COMPONENT CHECKLIST 1. Each package should contain the parts listed and shown below Part 1 Part 2 Mounting Plate..1 pc Fixing Coupler..1 pc Part 3 Part 4 Top Column..1 pc Mid Column..1 pc Part 5 Part 6 Bottom Column.. - Page 7 COMPONENT CHECKLIST Part 10 Part 11 M5 x 10 M8 Self Locking Socket Button Cap Screw..4 pcs Nylon Nut ......8 pcs Part 12 Part 13 Extension Bracket Truss Head Screw 75mm..2 pcs M2. 6x15 M3x15 M3x20 ..4 pcs each 150mm..
- Page 8 INSTALLATION GUIDE 1. Assembly procedure- Installtion of Suspension Rod Install Mounting Plate and Fixing Install Top Column with M8x50 socket Coupler. Cap Screw and M8 Self-Locking Nylon Nut, fi x Mounting Plate and Fixing Coupler togather. Install Mid Column. First align two holes Install Bottom Column.
- Page 9 INSTALLATION GUIDE 2. Parts Assembly - Installation of Universal Base Lift the Projector with both middle fi nger Lift the Projector with both middle fi nger along the depth od the Projector to along the depth of the Projector to search for the Cental of gravity (CG).
- Page 10 INSTALLATION GUIDE Assemble the selected Extension Use the Tress head screws provided in the package to tighten the Extension Bracket with the following items: Bottom Spacer, Spacer (if needed) & Brackets to the Projector. Square Nut. For Extension Bracket more than 50mm (1.97”) (Square Nut x 2 ) Bottom Spacer Bottom Spacer...
- Page 11 INSTALLATION GUIDE 3. Installation of Ceiling Mounting Kit Install the Universal Ceiling Mounting Lift and insert the assembled Projector Kit to the ceiling. Fix Suspension Rod done in step-2.9 into the lower Rod by M10 expansion bolt (not included) of the Universal Ceiling Mounting Kit. on the ceiling.
-
Page 12: Specification
(700) mm Ø 35mm & Ø 40mm with Optional Rod 20kg (44 lbs) Load Capacity ** For details and updated Command and Program Software, please visit and download from www.abtussingapore.com *Specifi cations are subject to changes without notice. ABtUS SINGAPORE PTE LTD www.abtussingapore.com...