Abtus AV541 User's Operation Manual

INSTALLATION GUIDES:
Step 3:
You can adjust the viewing angle by adjusting the display screen directly. If it is too loose, you
can tighten the nuts by wrench as the below drawing shown. (Figure4)
C
Figure 4
PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TV MOUNTS
TO THE BACK PANEL OF TV IN STEP 2 . MAKE SURE THE APPROPRIATE
MOUNT HARDWARE IS BEING USED PROPERLY .
1. Select correct Mounting Hardware according to the screw hole size of your TV, discard any
remaining screws or spacers.
2. Carefully lay your TV on its face on a non-abrasive surface, making sure to lay padding
underneath it so as not to damage the screen .
3. Place left TV mount and right mount in the approriate position, making sure CENTERED on
the back of the TV and LEVEL with on another
** For details and updated Command and Program Software,
please visit and download from www.abtussingapore.com
*Specifi cations are subject to changes without notice.
ABtUS SINGAPORE PTE LTD
±90°
±360°
+15°
-15°
www.abtussingapore.com
LCD/LED
Monitor Display
Double Arm Wall Mount
ABtUS SIGAPORE PTE LTD
Model: AV541
ABtUS SINGAPORE PTE LTD
www.abtussingapore.com
Revision 0
www.abtussingapore.com