Wizard Mode; Menu Navigation Map - dbx AFS2 Owner's Manual

Wizard Mode

This operating mode is entered by pressing the
procedure with simple, step-by-step instructions. By ringing out the system for feedback, higher system gain can be achieved
before the onset of feedback. This is accomplished by pushing your system into feedback so AFS can detect the frequencies
prone to feedback and then notch them out using Fixed filters. When the AFS Wizard is complete, it will automatically enable
the Live filters for automated protection during system use. See 'Ringing Out The Sound System' on page 19 for
further information on using the Wizard.

Menu Navigation Map

The below navigation map shows the navigational hierarchy of the AFS2 and how to navigate the unit.
HOME MODE
Information View
Home Screen
Filter Plot
Home Screen
For further information on the menus and parameters in Menu Mode, see 'The Menus & Parameters' on page 24.
button. The Wizard walks you through the configuration and ring-out
WIZARD
Press the MENU/BACK button
AFS Options
Turn the DATA wheel to make selections. Press the DATA wheel to con rm selections.
AFS Options Menu
Parameters:
CHANNEL LOAD PRESET
BYPASS SAVE PRESET
FILTER MODE FACTORY DEFAULT
CONTENT MODE
FIXED FILTERS
CLEAR MODE
CLEAR <PRESS SELECT>
LIVE LIFT
LIFT AFTER
VIRTUAL HIGHPASS
SENSITIVITY
Press the MENU/BACK button
Press the WIZARD button
Preset Menu System Menu
Preset Menu System Menu
Parameters: Parameters:
STEREO LINKED
POWER UP OPTION
DISPLAY TIMEOUT
The currently
installed software
version can also be
found in this menu.
AFS Wizard
WIZARD MODE
15