Installation In A Sliding Sash Windows - Sylvania SYL-14PE Owner's Manual

INSTALLATION INSTRUCTIONS
Window
panel
Foam seal
11

Installation in a sliding sash windows

Foam seal A 1. Cut the foam seal(adhesive type) to the proper length and
(adhesive type)
attach it to the window frame. See Fig.14.
2. Attach the window slider kit to the window sill. Adjust the
length of the window slider kit according to the width of
Fig.14 window, shorten and adjust the window kit if the width of
window is less than 27 inches.
Open the window sash and place the window slider kit on
the window sill. See Fig.15.
22.1" ~ 38.6"
3. Cut the foam seal(adhesive type) to the proper length
and attach it on the top of the window. Show as in Fig.16.
4. Close the sliding sash securely against the window.
Fig.15
5. Cut the foam seal to an appropriate length and sealing the
open gap between the top window sash and outer window
sash. Show as in Fig.17.
Fig.16
Fig.17