Remote Power (Ppoe) - Accelerated Concepts 6200-FX User Manual

Remote Power (PPoE)

One of the biggest limitations in laying out a robust cellular network is the availability of power.
Running power cabling is also a primary cost driver of cellular installations. All Accelerated
Concepts products provide delivery of both data and power over a single Ethernet cable. This
allows deployment of devices exactly where they are needed to provide the best cellular coverage
at a much lower installation cost.
It is not necessary to co-locate the 6200-FX with other telecommunication equipment. The 6200-
FX is designed to be positioned for optimal cellular signal strength. The built-in signal strength
meter and optional temporary battery pack are to be used to identify the optimal installation
location. The 6200-FX should be powered either directly using the included 12V power adapter or
over an Ethernet Category 5 cable via Passive Power over Ethernet (PoE) and the included power
injector cable. This allows the device to be mounted on high walls, suspended from the ceiling,
or even placed in a building attic. Below is a diagram detailing how to properly connect and apply
remote power to the 6200-FX through the Passive PoE injector cable.
Accelerated Concepts, Inc. © 2014 5 of 35 6200-FX User's Guide v2.3