Appendix B: Configuring Special Apn - Accelerated Concepts 6200-FX User Manual

Appendix B: Configuring Special APN

If you need to configure a special APN for your 6200-FX:

Power the 6200-FX on with no USB modem, aircard, or any other device connected to the
6200-FX's internal or external USB ports.

Connect an Ethernet cable between the 6200-FX and a laptop or PC.

Power the 6200-FX on. Once the 6200-FX boots up and assigns an IP address to your
computer, open a web browser and navigate to '192.168.210.1''

Enter in the APN credentials required for your USB modem or aircard to connect. In the
example below, the APN 'wbb.business.net' is being utilized.
APN: wbb.business.net
Username: secureuser
Password: secret

Click 'Save' to save the APN into the 6200-FX.

Power off the 6200-FX.

Connect the USB modem or aircard into either the internal or external port of the 6200-FX.

Power the 6200-FX on.
Figure 7: Special APN Panel
Once the 6200-FX boots up, it will try to connect using the specified APN with the USB modem.
Once the 6200-FX establishes a network connection (signified by the USB LED illuminating blue
and 3G LED illuminating either green or blue), the 6200-FX will check its configuration on the
6200-FX portal, save any specified APN configurations, and restart once to apply any new
configuration settings.
Accelerated Concepts, Inc. © 2014 29 of 35 6200-FX User's Guide v2.3