Globrite White Led Pool Light Overview; Operating Globrite Lights Using A Wall Switch; Using And External Transformer For Multiple 12 Vac Globrite Lights; (With A 300 W Transformer) - Pentair Globrite Installation And User Manual

™
GloBrite White LED Pool Light Overview
This manual describes how to install and replace the pool and spa GloBrite
Light. The GloBrite White LED Light allows you to choose from one of three brightness
levels. For more information see page 2.
Operating GloBrite LED Lights Using a Wall Switch
The GloBrite LED light can be manually controlled using a standard wall-mount light
switch. Multiple GloBrite lights can be connected via a junction box and a 12 VAC
isolation transformer to a single switch so that all lights can be switched on and off
together. For wiring diagram, see page 13.
Using an External Safety Isolation Transformer for Multiple 12 VAC GloBrite
Lights
When using multiple GloBrite 12 VAC lights on a 100 Watt safety isolation transformer, it
is recommended that no more than five (5) GloBrite lights be used. For long cable
lengths with a single light, It is recommended not to exceed 150 feet (45.72 m) of total
cable run between the 12 VAC isolation transformer and the GloBrite light.
100 Watt
Transformer
Maximum Wattage Using Multiple GloBrite White LED lights (with
a 300 Watt Isolation Transformer)
IMPORTANT! When using multiple 12 VAC Pentair
total allowable light wattage is 300 Watts maximum. The individual light wattage is as
follows:
•
One GloBrite White LED Pool light is 15 Watts maximum
•
One GloBrite Color LED Pool light is 15 Watts maximum
•
One AmerBrite White LED (500W) pool light is 51 Watts maximum
•
One AmerBrite White LED (400W) pool light is 44 Watts maximum
•
One AmerBrite White LED (300W) pool light is 36 Watts maximum
•
One AmerBrite Color LED pool light is 36 Watts maximum
•
One IntelliBrite Color LED pool light is 26 Watts maximum
•
One IntelliBrite Color LED spa light is 18 Watts maximum
12 Gauge
J Box
(minimum)
150 ft.
GLOBRITE™ White LED Pool/Spa Light Installation and User's Guide
Note: If a longer cable run
is necessary, it is
recommended that
separate 100 Watt safety
isolation transformers be
used for each light with no
more than 150 feet of total
cable run between the
transformer and lights.
®
LED white pool and spa lights the
1
™
White LED