Infrared Gonogo Test - Nokia 7200 Service Manual

nokia
C P
ONNECTING EOPLE
NMP/CMO Sales and Marketing
Customer Care EMEA
Technical Services, Repair Concepts
15.

INFRARED GONOGO TEST

Infrared test
You need another infrared device (e.g. 6310i) to do a GoNoGo test. The infrared windows of the devices
must be directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is
activated in receiver device.
Warning: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices.
This device is a Class 1 Laser product.
Test unit
• From Home Menu, push the Menu key (lower key)
entries.
• If phone and SIM memory is empty, create one new entry.
• Choose one phonebook entry and select Details.
• Select Options
Select Send bus. Card
•
• Select Via infrared
If sending of business card fails, make sure again that infrared windows are directed to each other
and infrared is activated in reference device. Then try again sending.
Test was successful, if you get a confirmation message on receiver device.
You will not get a confirmation on sender device.
Service Manual 7200 Level 1&2
PAGE 20 (2 4)
Confidential
Reference unit, infrared activated
down. This displays Phonebook
Copyright 2003-2004 © Nokia Corporation
Approved 1.0
DJk
03.03.2004