Nokia 7200 Service Manual page 14

nokia
C P
ONNECTING EOPLE
NMP/CMO Sales and Marketing
Customer Care EMEA
Technical Services, Repair Concepts
Put the new Domesheet onto the Domesheet Assembly
Jig. Mind the guiding pins.
Arrows point to the right assembly position and put
the UI PWB Module onto the Domesheet Assembly Jig
carefully.
Finally check that the holes of Domesheet are centered
to the UI PWB module holes. Ensure also, that there are
no bubbles in Domesheet film.
Service Manual 7200 Level 1&2
PAGE 14 (24)
Confidential
Remove the protection film. Tweezers can be used for
retaining the Domesheet.
Press on PWB Module after checking that all guiding
pins are positioned correctly.
Remove the protection film from UI PWB Module.
Copyright 2003-2004 © Nokia Corporation
Approved 1.0
DJk
03.03.2004