Advertisement
Important Safety Instructions
When using your video equipment, basic safety precautions should always be
followed, including the following:
•
Do not place the screen near open
flames or other heat sources.
•
Do not place near an open window or
fan, the air movement will affect picture
quality and could cause the screen to
fall over.
Setting Up the Screen
1.
Identify the location you will set up the
screen. Make sure the location is level.
2. Pull down the four legs. Keep the screen
in an upright position; make sure the
legs are fully down and in the locked
position (Figure 1).
3. Firmly grasp the handgrips on each
side of the case with both hands. Push
in on the buttons to unlock the case
(Figure 2).
4. Pull the case apart slowly to extend
the screen.
•
Only place screen on a flat level surface.
Failure to do so could result in damage
to the screen.
Button to Unlock on the Front
Figure 1
Figure 2
Advertisement
