Electrovaya POWERPAD 2400 DC Safety Instruction & User Manual page 11

1: Connect the DC output port of the PowerPad that is charged to the DC output connector.
Open the lid of the DC output port and make sure there are no foreign objects inside the ports.
The numbers on the DC output connectors must be connected to the same numbers on the DC
output ports. Check that the plug is inserted completely tight and not loose.
1
2 3
2 1
3
2: Turn on the PowerPad that is charged.
Turn the ON/OFF switch on. Check if the Battery Status LEDs are on to see if the PowerPad is on.
3: Connect the DC input connector of the PowerPad that is charged to the DC input connector of
the PowerPad with low battery level.
Open the lid of the DC input port and be certain that there are no foreign objects inside the port.
Plug-in the DC input connector to the DC input port. The numbers on the connectors must be
connected to the same numbers on the input ports. Check that the plug is inserted completely
tight and not loose.
DC Input Connector
11