Table of Contents
Advertisement
1
2
3
4
t
I
Turn on the TV, then set it to the preset
video channel or
AV
mode.
Insert a recorded video cassette.
Gently push the centre of the cassette
until it is loaded automatically.
T
n
Press the PLAY button.
To stop the playback, press the STOP
button.
To rewind the tape, press the REW button.
To advance (fast-forward)
the tape, press
:he FF button.
To eject the video cassette, press the
EJECT button on the
VCR.
Variable playback modes
Forward search
1
Press the FF button during playback or
fast-forward operation.
2 Press the PLAY button to resume normal
playback, or the FF button to resume
fast-forward operation.
Reverse
search
1
Press the REW button during playback or
rewind operation.
2 Press the PLAY button to resume normal
playback, or the REW button to resume
rewind operation.
Still picture
1 Press the PAUSE/STILL
button during
normal playback.
2 Press the PLAY button to resume normal
playback.
Frame
advance
1 Press the PAUSWSTILL
button during still
playback to advance the picture frame by
frame.
2 Press the PLAY button to resume normal
playback.
Slow
motion
1 Press the SLOW button during normal
playback or during still picture.
The tape speed
can be set at 1/5 or 1/30 of
normal
speed
by pressing
the
SLOW
button.
2
Press the
PLAY button to resume normal
playback.
PLAYBACK
Tracking adjustment
This VCR starts the automatic
tracking
function
when you inserf the tape. During
playback this function will adjust the tracking
to the best possible image. If noise appears in
the playback picture, press the (CH+ or CH–)
button, to reduce the noise interference
in the
image.
___ -.
,.+ .—.—
—.—
"a%'~"
Q4t!yo \.
,
Noise interference
Note:
Depending on the cassette tape, you may find that
some noise interference cannot be completely
corrected using the tracking controls.
Correcting
noise interference
during
variable playback modes
If noise interference
(bars) appears during
still picture, frame advance or slow motion
modes
From still picture or frame advance go into
slow motion mode, then use the (CH+ or
CH–) button, to correct. You can then resume
still picture or frame advance mode.
If the still picture moves up and down
Use the (CH+ or CH-) button, to correct.
When noise interference
is corrected using
the (CH+ or CH–) button, the settings will be
effective until the cassette tape is unloaded.
Once the cassette tape is unloaded, the VCR
is reset and the next time the VCR is used
you may need to do the corrections again.
.,
Notes:
During variable playback modes the picture may
contain some noise or vibration that cannot be
corrected. This is not a malfunction.
If still picture or slow motion playback is
continued for about five minutes, the VCR will
automatically change to
stop mode in order to
prevent the tape from being damaged.
3
BASIC OPERATION
i
II
%
000
000
0-9
CH+, -
:
PLAY
SLOW
REW
FF
STOP
Pflly
EJECT
Deb
L
Auto power on
The power is automatically
switched on as a cassette is
inserted while the VCR is in the
stand-by mode.
Auto play
The VCR will play back a tape
automatically
when a video
cassette is inserted whose
erasure-prevention
tab has been
removed.
Auto eject
When a video cassette without an
erasure-prevention
tab is played
to the end of the tape, the tape
will be automatically
rewound
and then the cassette will be
ejected.
Power off eject
The video cassette will be ejected
when the
EJECT button is
pressed,evenwhenthe
VCR is in
stand-by
mode.
Advertisement
Table of Contents
