Analog Audio - Insignia NS-28D220NA16 User Manual

NS-28D220NA16 28" 720p 60Hz, LED TV

Analog audio

When you connect an analog system or sound bar to the
On your TV
Audio cable
connector
/AUDIO OUT
jack
1 Make sure that your TV's power adapter is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the
on the analog speaker system or sound bar.
3 Plug your TV's power adapter into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
5 On your TV's Audio menu, set the Headphones/Audio Out option to Headphones/Audio Out Variable or Audio
Out Fixed. See the Headphones/Audio Out option in
Audio cable
Analog speaker system
Sound bar
/AUDIO OUT jack on the side of your TV and to the AUDIO IN jacks
www.insigniaproducts.com
/AUDIO OUT jack, the TV speakers are muted.
Side of TV
Adjusting sound settings on page 47.
29