SHD2110/3110 Quick Start Guide Power On/Off Switch Power On/Off Switch with Power Metering Version 1.00 Edition 1, 7/2011 2011 ZyXEL Communications Corporation www.zyxel.com...
Page 3
SHD2110 SHD3110 Placing the SHD2110/3110 1. Do not place the SHD2110/3110 facing direct sunlight, or in a humid, or dusty area. 2. The suitable temperature for the SHD2110/3110 is 0°C~40°C. 3. Do not place the SHD2110/3110 near flammable substances or any source of heat (e.g.
Installation 1. Plug the SHD2110/3110 into a wall outlet near the appliance to be controlled. 2. Plug the appliance into the SHD2110/3110. Ensure the power load does not exceed 3000 watts. 3. Turn the appliance on. 4. The ON/OFF button on the SHD2110/3110 can now control the power of your appliance.
Page 5
3. There are two groupings - 1 and 2. (Refer to Z-Wave's Groupings in the User’s Guide) • The Z-Wave Controller will display whether the inclusion/exclusion of the node ID has succeeded or failed. Note: See the User’s Guide for the SHD2110/3110’s advanced programming.
Page 6
Socket Type Refer to the following for the socket type suited for your country: SHD2110 SHD3110 Make sure that the current used by the plug of the appliance is under 14.5A and has the same head as the enclosed plug before...
Toubleshooting Symptom Possible Cause Recommendation The SHD2110/ 1. The SHD2110/3110 is Check the power connections. 3110 is not not plugged to an working. The LED electrical outlet display is off. properly. 2. A malfunction has Contact your vendor for occurred.