Vax DynamoPower U85-DP-Be Getting Started Manual page 7

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Assembling your upright
Insert the back panel into
the floorhead.
Place the dirt container onto
the machine and push until it
clicks into place.
If your model comes with a TurboTool
Push TurboTool holder on to
the handle.
Insert the lower quick release
cord hook into the hole at the
bottom of the back panel.
Insert the extension tube into
the handle.
Clip TurboTool into position.
Getting started
Now take the small clip and
push it down between the
post-motor filter cover and
back panel, over the quick
release cord hook to lock
into place.
Push handle into the top of
the machine until it clicks
into place.
Insert the end of the hose
into the tube at the back of
the machine and connect the
hose end to the floorhead.