Programming The Computer - Bell Dashboard 300 User Manual

20-function cycle computer

Hide thumbs Also See for Dashboard 300:

Manual (11 pages)

Table Of Contents

Table of Contents

Available languages

Step 1: Set the Wheel Value–

the table provided, determine the correct, 4-digit,

wheel value based on the size of your tire. The

wheel value is the distance in millimeters per one

revolution of the wheel. Next, press and hold the

left and right button for two seconds. The preset

value "2124" should appear with the digit "4"

flashing. Press the right button to modify the digit

to the correct setting. Once correct digit is shown,

press the left button to move to the next digit.

Repeat until all four digits are set to the correct

wheel value for your bike.

Step 2: Set KM or Mile Selection–

RIGHT button to choose kilometer or mile selection. Press the LEFT button to confirm.

Step 3: Set age and Weight–

as the large number above the horizontal line. Press the RIGHT button to modify the "ones" digit to the correct

setting. Press the LEFT button to confirm. Repeat for the "tens" digit. Enter your weight as the smaller number

below the horizontal line following the same steps. By entering your actual age and weight, you will get a more

accurate calculation of calories and fat burned

(160lb) based on your selection of kilometers or miles respectively.