Advertisement
Wiring the Crossovers
The LP-1 and LP-2 are designed to be wired in series with the
subwoofers being used. Both positive (+) and negative (-)
thruput connectors are provided. For more information, refer
to the diagrams beginning on page 8.
Working with 2Ω and 4Ω woofer loads and crossover fre-
quencies of 100Hz will set the inductor values for the LP-1
and LP-2 at 3.5 mH and 6.6 mH respectively.
To place the crossover in "mono mode,"
1. Place a jumper between the left to right positive outputs.
2. Place another jumper between the left to right negative
outputs.
– 6 –
Advertisement
