Toyota Camry Owner's Manual page 361

2
Press and hold one of the

HomeLink buttons and the
transmitter button. When the

HomeLink
changes from a slow to a
rapid flash, you can release
both buttons.
If the HomeLink
comes on but does not flash, or
flashes rapidly for 2 seconds
and remains lit, the HomeLink
button is already programmed.
Use the other buttons or follow
the "Reprogramming

HomeLink button" instructions.
(P. 363)
3
Test the HomeLink
tion by pressing the newly
programmed button.

If a HomeLink
programmed for a garage door,
check to see if the garage door
opens and closes. If the garage
door does not operate, see if
your remote control transmitter
is of the rolling code type. Press
and hold the

HomeLink button. The remote
control transmitter is of the roll-
ing code type if the HomeLink
indicator light flashes rapidly for
2 seconds and then remains lit.
If your transmitter is of the roll-
ing code type, proceed to the
heading "Programming a Rolling
Code system".
4
Repeat the steps above to program another device for any of the
remaining HomeLink
indicator light

indicator light

a

opera-
button has been
programmed


buttons.
6-4. Other interior features
361
6