Toyota Camry Owner's Manual page 115

■
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless
remote control.
1
Turn the power switch off.
2
When the indicator light on the key surface is not on, press and hold
or
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Multi-information
display
Vehicles with an alarm: To prevent unintended triggering of the alarm, unlock
the doors using the wireless remote control and open and close a door once
after the settings have been changed. (If a door is not opened within 60 sec-
onds after
automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (P. 80)
■
Conditions affecting the operation of the smart key system or wireless
remote control
P. 124
■
Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: P. 523)
3-2. Opening, closing and locking the doors
for approximately 5 seconds while pressing and holding
2
.)
Unlocking function
Holding the driver's door
handle unlocks only the
driver's door.
Holding the front passen-
ger's door handle unlocks
all the doors.
Holding either front door
handle unlocks
doors.
is pressed, the doors will be locked again and the alarm will
Exterior: Beeps 3
times
Interior: Pings once
Exterior:
all the twice
Interior: Pings once
115
,
Beep
Beeps
3