Toyota Camry Owner's Manual page 176

176
4-3. Operating the lights and wipers
High beam automatic turning on or off conditions
When all of the following conditions are fulfilled, high beam will be
automatically turned on:
● Vehicle speed is above approximately 21 mph (34 km/h).
● The area ahead of the vehicle is dark.
● There are no oncoming or preceding vehicles with headlights or tail
lights turned on.
● There are few streetlights on the road ahead.
If any of the following conditions are fulfilled, high beam will be auto-
matically turned off:
● Vehicle speed drops below approximately 17 mph (27 km/h).
● The area ahead of the vehicle is not dark.
● Oncoming or preceding vehicles have headlights or tail lights
turned on.
● There are many streetlights on the road ahead.
Turning the high beam on/off manually
■
Switching to low beam
Pull the lever to the original
position.
■
Switching to high beam
Turn the light switch to
The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.
.