Beko WKD 24500 TS User Manual page 34

is blinking either there is no water or tap is off. Check
your taps. Turn your machine off and on. If the prob-
lem persists unplug your machine, turn off tap water
and call authorized service.
• If program is started and program selection can not be
performed your machine might be in protection mode
due to infrastructure problem (voltage, water pressure,
etc.) Press and hold the > Start/Pause/Cancel < but-
ton for 3 seconds in order to switch machine to factory
settings.
• Most of the warnings resulting in calling an authorized
service are due to infrastructure problems. For this
reason applying to an Authorized Service is recom-
mended.
8