Selecting Channel; Program Scanning; Screen Display; Remote Sensor - Boss Audio Systems BV-500 Owner's Manual

In-dash lcd monitor/tv tuner/ am-fm receiver/cd changer controller
Hide thumbs Also See for BV-500:
Table of Contents

Advertisement

Press the button repeatedly or press CH + button (9) or CH – button (10) to select
the desired item then press CONTROL + button (24) or CONTROL – button (25) to
enter the corresponding sub-menu to set.
- In PICTURE MENU, use CH + button (9) or CH – button (10) to select picture
mode upward or downward as follows:
BRIGHT
Then use CONTROL + button (24) or CONTROL – button (25) to adjust the
selected item. Note: In PAL SYSTEM, there is no "TINT" item.
- In TUNER MENU, use CH + button (9) or CH – button (10) to select picture mode
upward or downward as follows:
POS
Then use CONTROL + button (24) or CONTROL – button (25) to adjust the
selected item.
- In SYSTEM MENU, use CH + button (9) or CH – button (10) to select picture
mode upward or downward as follows:
COLOR
Then use CONTROL + button (24) or CONTROL – button (25) to adjust the
selected item.
In AV mode, press MENU button (23), the screen will display PICTURE MENU and
SYSTEM MENU but not TUNER MENU. And in SYSTEM MENU, there is no
"SOUND" item. The setting method is the same with that in TV mode.
Note: In the menus (except TUNER MENU), if you don't operate over 6 seconds,
the screen display will disappear.

• SELECTING CHANNEL

Press CH + button (9) or CH – button (10) to choose channel upward or downward.

• PROGRAM SCANNING

Press SCAN button (27), "SCAN OFF" will display on the lower left corner of the
screen. Press it again, the screen will display "SCAN ON", then it begins to scan
1.5 seconds of each channel in sequence. When it completes, the screen will
display "SCAN OFF". In the course of scanning, press SCAN button (27), "SCAN
OFF" will also display on the screen and it stops on the TV channel just scanning.

• SCREEN DISPLAY

Press DSP button (26), the screen will display the current status such as
TVch/AV1/AV2, the COLOR SYSTEM and the SOUND SYSTEM on the right-top
corner. In AV mode, there is no SOUND SYSTEM display.

• REMOTE SENSOR

Point the remote control handset to the remote sensor (28).
Press the function keys on the handset to control TV.
CONTRAST
SKIP
BAND
SOUND
LANG.
COLOR
SHARP
FINE
AFT
B/B
CORING
12
TINT
SEARCH
ASM
HALFTONE

Advertisement

Table of Contents
loading

Table of Contents