Safety Instructions - Axis M1103 Installation Manual

Page 6

Safety Instructions

• The Axis product shall be installed by a trained professional.
• The Axis product shall be used in compliance with local laws and regulations.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Do not install the product on unstable brackets, surfaces or walls.
• Use only applicable tools when installing the Axis product. Excessive force could cause damage to
the product.
• Do not use chemicals, caustic agents, or aerosol cleaners. Use a clean cloth dampened with pure
water for cleaning.
• Use only accessories that comply with technical specification of the product. These can be provided
by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself. Contact Axis support or your Axis reseller for
service matters.
Transportation
• Keep the protective packaging. When transporting the Axis product, the protective packaging shall
be replaced in its original position.
• When transporting the Axis product, use the original packaging or equivalent to prevent damage to
the product.
Battery
The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock
(RTC). Under normal conditions this battery will last for a minimum of five years.
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery
needs replacing, a log message will appear in the product's server report. For more information about the server
report, see the product's setup pages or contact Axis support.
The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support
at www.axis.com/techsup for assistance.
• Risk of explosion if the battery is incorrectly replaced.
• Replace only with an identical battery or a battery which is recommended by Axis.
• Dispose of used batteries according to local regulations or the battery manufacturer's instructions.
AXIS M11 Series Installation Guide