ZyXEL Communications WAP3205 Quick Start Manual page 4

Set Up a WPS Connection
Use Wi-Fi Protected Setup (WPS) to let
WPS-enabled wireless devices securely
access the WAP3205.
B
If WPS is not working or your wireless device
does not support WPS, go to the next section.
6
A A
1. Place a WPS-enabled
wireless device (B)
within range of the
WAP3205 (A).
2. Press the WPS button
for two to three seconds
on the WAP3205. The
WPS light (
WAP3205 blinks.
3. Press the WPS button
on the wireless device
within two minutes of
pressing the button on
the WAP3205.
4. The WPS light (
the WAP3205 shines
steadily when the WPS
process is finished.
) on the
) on