Panasonic Li-ion EY0L82 Service Manual page 4

3.2. Trial Operation (After Checking Troubleshooting Guide)
3.2.1. Assembly
• Confirm if there is no gap between Housing A and B by pinching lead wires or power cord.
• Confirm if the slide terminal cover moves smoothly.
• Confirm if 4 screw caps are attached to a housing B.
3.2.2. Operation
• Confirm if the LED lamp works normally by insert and remove the battery pack.
• Confirm if the power cord does not break by moving the power cord bushing from side to side and up and down.
• There should be no abnormal heating or sound.
4