For Your Safety; Esd Protection - Nokia 5140 Service Manual

Hide thumbs Also See for 5140:

Table of Contents

QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible products.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user's guide for detailed safety instructions.

Do not connect incompatible products.

Nokia requires that product service points have sufficient ESD protec-

tion (against static electricity) when servicing products.

Any product of which the covers are removed must be handled with

ESD protection. The SIM card can be replaced without ESD protection

if the product is otherwise ready for use.

To replace the covers ESD protection must be applied.

All electronic parts of the product are susceptible to ESD. Resistors,

too, can be damaged by static electricity discharge.

All ESD sensitive parts must be packed in metallized protective bags

during shipping and handling outside any ESD Protected Area (EPA).

Every repair action involving opening the product or handling the

product components must be done under ESD protection.

ESD protected spare part packages MUST NOT be opened/closed out

of an ESD Protected Area.

For more information and local requirements about ESD protection

and ESD Protected Area, contact your local Nokia After Market Ser-

vices representative.

Issue 2 05/05

Nokia Customer Care

For your safety

Table of Contents

5140i