Page 2
12 line tlph. unit, External connection 4060 Annex V 99400-015-EC 12 line tlph. unit, External connection 4061 Annex W 99400-017-EC BTS 4000 – Single line system BTS-4000 Annex X External cabling 99400-018-EC BTS 4000 – 12 line system BTS-4000 Annex Y...
Handbook page 4/43 PHONTECH Doc.No.: 99400-000-DE BATTERYLESS TELEPHONE SYSTEM 4000 SERIES 4050/4051/4055/4060/4061. SYSTEM DESCRIPTION. LIST OF CONTENTS: page 1. GENERAL DESCRIPTION 2. LIST OF TELEPHONE UNITS 3. ADDITIONAL EQUIPMENT 4. LIST OF FACILITIES 5. BASIC MEANS OF OPERATION 6. INSTALLATION •...
Handbook page 5/43 PHONTECH Doc.No.: 99400-000-DE 1. GENERAL DESCRIPTION The batteryless telephone system is developed and manufactured at phonTECH A/S. The different modules in the system are designed to meet the need and demand for non- powered internal communication on ships. Basically the system is divided into two types, the single line system (4050/4051) for end-to end communication between two stations, like the bridge and the machinery spaces.
Page 6
Handbook page 6/43 PHONTECH Doc.No.: 99400-000-DE 2. LIST OF TELEPHONE UNITS Type BTS 4061. 12 lines amplified battery’s telephone. Type BTS 4060 12 lines battery’s telephone. Type BTS 4051 Single line amplified battery’s telephone. Type BTS 4050 Single line battery’s telephone. Type BTS 4055 12 lines WP (weatherproof) telephone.
Handbook page 7/43 PHONTECH Doc.No.: 99400-000-DE 3. ADDITIONAL EQUIPMENT. Type 4018 Headset Plug-box with Call stop. Type 9000 External signal device relay switchbox. Type 0018 Headset with chest switch and plug. Type 9010 Headset with chest switch. Type 99400-011 Relay plug-in module for external signal device. Type 4052 Junction box type I (12 ext.) Type 4053...
Page 9
Handbook page 9/43 PHONTECH Doc.No.: 99400-000-DE RELAY MODULE (PCB 99400-011) A relay module for activation of external signal device can be installed in the following units: - 4050 / 4051 / 4055 / 4060 / 4061 The relay module is to be mounted by the installer. The unit is delivered separately, and is to be plugged into the appropriate telephone unit.
Page 10
Handbook page 10/43 PHONTECH Doc.No.: 99400-000-DE 4. LIST OF FACILITIES. • 12 LINES BATTERYLESS TELEPHONE WITH AMPLIFIER 4061. Handset with PTT button. Noise cancelling microphone. Piezo - electric buzzer for call indication. Call led. 20 seconds call delay timer. (24 VDC required) Call stop button.
Page 11
Handbook page 11/43 PHONTECH Doc.No.: 99400-000-DE 5. BASIC MEANS OF OPERATION. • GENERAL The batteryless telephone system is operated by means of the handset with PTT switch, the call line selector switch, (4055/4061/4060 only) and the call generator crank. There is no priority between units in the system and several users can join the system simultaneously.
Page 12
Handbook page 12/43 PHONTECH Doc.No.: 99400-000-DE • Headset type 9010 - Operation Make a call out from the telephone to another station: 1. Put the headset on, with the microphone close to your mouth. 2. Select line, operate the call crank on the telephone. 3.
Handbook page 13/43 PHONTECH Doc.No.: 99400-000-DE 6. INSTALLATION. • SYSTEM CONFIGURATION: The system is to be configured by the installer. Each telephone must be connected to different “call number” with regards to the Line selector (rotary switch). This is done by means of links in each telephone.
Page 14
Handbook page 14/43 PHONTECH Doc.No.: 99400-000-DE o Recommended conductor area is 0.75 sq.mm. o All cabling in the batteryless telephone system to be a separate network. o DO NOT COMBINE WITH OTHER CABLES. THIS IS TO PREVENT DISTURBANCE AND NOISE CAUSED BY INTERFERENCE. •...
Page 15
Handbook page 15/43 PHONTECH Doc.No.: 99400-000-DE 7. TECHNICAL DATA. TELEPHONE UNITS 4050/4051/4060/4061 Dimensions flush mounting: 240 x 144 x 70 mm. (h x w x d) Cut- out measurement flush mounting: 212 x 116 mm. (h x w) Dimensions wall mounting wall mounting box included: 242 x 146 x 73 mm.
Page 16
Handbook page 16/43 PHONTECH Doc.No.: 99400-000-DE 8. SINGEL LINE DIAGRAM – 12 LINE SYSTEM Page 13 of 14...
Page 17
Handbook page 17/43 PHONTECH Doc.No.: 99400-000-DE 9. SINGEL LINE DIAGRAM – SINGLE LINE SYSTEM Page 14 of 14...
Handbook page 18/43 PHONTECH COMMISSIONING PROCEDURE Use the tables below as guide during the commissioning of the batteryless telephone system. Installation (site):__________________________________ Customer/ client:__________________________________ Hull / building no:__________________________________ SCOPE OF SUPPLY Qty. Unit Type no. Serial no. Comments COMMISSIONING TESTS ACTION RESPONSE COMMENTS...
Page 28
RELAY SWITCH BOARD FOR BATTERYLESS SYSTEM 99400-001-CD DESCRIPTION The Batteryless Telephone Board 99400-001 is designed and produced by phonTECH communication a/s, Horten in Norway. The board is a plug-in module supporting switching facility for external signal device in the batteryless telephone system.
Page 36
Handbook page 36/43 Doc.No.: 88100-004-DE Material / color/ Finish ABS / RAL 7035 Mounting Stainless steel bracket Weight 1.1 kg IP rating IP 56 Operating voltage DCV 20-28 Tone frequency 1 (ST2 shorted) 900-1250 Hz. Tone frequency 2 (ST2 open) 670- 925 Hz Sweep frequency 1 (ST3 shorted) 3 Hz...
Page 37
Handbook page 37/43 File ref.: R300 blinklys.doc The R300 and R301 is an effective heavy duty powerful revolving light in a ABS housing. It has a polygon reflector and a polycarbonate dome. The housing is equipped with a 3 mm neoprene gasket and tree M6 fixing bolts in bottom.