Behringer Ultragrph Digital DEQ1024 User Manual

Behringer Ultragrph Digital DEQ1024 User Manual

Digital stereo 31-band 24-bit/96 khz equalizer/feedback destroyer/dynamics processor

Advertisement

Quick Links

User’s Manual
Version 1.0
June 2003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultragrph Digital DEQ1024 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Behringer Ultragrph Digital DEQ1024

  • Page 1 User’s Manual Version 1.0 June 2003...
  • Page 2: Important Safety Instructions

    ULTRAGRAPH DIGITAL DEQ1024 IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
  • Page 3 ULTRAGRAPH DIGITAL DEQ1024 ULTRAGRAPH DIGITAL Digital Stereo 31-Band 24-Bit/96 kHz Equalizer/Feedback Destroyer/Dynamics Processor s Ultra high-resolution processor for all EQ, RTA and dynamic applications, especially for PA and audiophile mastering s Unique TRUE CURVE Function—what you see on the faders is what you get as frequency response s Revolutionary FBQ DETECTION system instantly reveals critical frequencies and can also be used as Audio Analyzer s Automatic and ultra-fast Feedback Destroyer plus feedback indication via fader LEDs...
  • Page 4: Table Of Contents

    It is our philosophy to share our enjoyment with you, because 6. WARRANTY .............. 14 you are the most important member of the BEHRINGER team. With your highly competent suggestions for new products you’ve made a significant contribution to shaping our company and making it successful.
  • Page 5: Introduction

    14 days of the date of purchase. You no wishes open. With these and many more features the DEQ1024 may also register online at www.behringer.com. The serial number is an absolutely all-purpose device for your recording or mastering needed for the registration is located at the top of the unit.
  • Page 6: Control Elements

    ON/OFF switch once again. frequency response with a special measurement microphone (e. g. BEHRINGER ECM8000) coupled to a real- time analyzer (integrated in the BEHRINGER ULTRACURVE If you briefly (for approx. 2 seconds) depress the RESET...
  • Page 7 ULTRAGRAPH DIGITAL DEQ1024 The LIMITER protects your equipment from signal peaks that could for example damage your speakers. Output signal levels that exceed the selected threshold value are limited, and the red LIMITER LED in the METER section (see In the world of ordinary graphic equalizers, there is always lights up.
  • Page 8 ULTRAGRAPH DIGITAL DEQ1024 The 12-digit LEVEL METER shows the signal level of the input and output signals. Use the METER switch located below it to select the respective signal, whereby the output signal is indicated when the switch LED lights up (green), Fig.
  • Page 9: Rear Panel

    SERIAL NUMBER of the ULTRAGRAPH DIGITAL. Please take the time to fill in and return the warranty card within 14 days after the date of purchase. Or register online at www.behringer.com. Fig. 3.1: The ULTRAGRAPH DIGITAL DEQ1024 as master equalizer...
  • Page 10: Master Equalizer In Sound Reinforcement Systems

    (the ULTRADRIVE PRO such a way so that extremely deep feedback disappears, creating DCX2496 digital crossover from BEHRINGER gives you all the a transparent-sounding monitor sound. tools needed for this). Only then does the ULTRAGRAPH DIGITAL come into play.
  • Page 11: Priming A Monitor System

    Fundamentals of lower tympani. Too Besides, you can supress narrow-band room resonances. An much boost produces excessive "boom". analyzer, such as the one integrated into the BEHRINGER digital 80 to 125 100 or 125 Hz are also used for hum equalizer ULTRACURVE PRO DEQ2496, can help you in your rejection.
  • Page 12: Installation

    ULTRAGRAPH DIGITAL DEQ1024 4. INSTALLATION 4.1 Rack mounting The BEHRINGER ULTRAGRAPH DIGITAL requires two height units (2 HU) for being installed into a 19" rack. Please allow at least an extra 4" of space for the connectors on the rear panel.
  • Page 13: Specifications

    2.5 kHz to 16 kHz (12 dB/oct.) Type gate and limiter with digital IGC (Interactive Gain Control) BEHRINGER continuously strives to assure the highest quality standards possible. Required modifications may be implemented without prior notice. Threshold variable: -60 to -10 dB (gate)
  • Page 14: Warranty

    § 3 and 4, BEHRINGER shall, at inspection costs are payable by the customer.

Table of Contents