Storage; Preparing For Storage; Removing From Storage - Ironton 2682050 Owner's Manual

Prepare the sprayer for end-of-season storage by running RV antifreeze through the system. This
will keep internal parts lubricated, protect against corrosion, and keep the unit from freezing.
The sprayer will be damaged if it freezes.
Protect the sprayer from freezing during storage by following the instructions below.

Preparing for storage:

1. Add antifreeze
2. Spray briefly

Removing from storage:

1. Drain
2. Flush with water
3. Disposal

Storage

CAUTION
Pour 1/2 gallon of RV antifreeze into the tank.
Note: RV antifreeze is non-toxic and biodegradable and generally safer
for the environment than automotive antifreeze.
Turn on the pump motor and squeeze the gun trigger briefly until fluid
sprays. Store gun in lance clips. If equipped, store broadcast lance in
stored position to prevent damage.
Drain the antifreeze left in the tank through the tank drain hole into a
suitable container.
Fill the tank with fresh water and run through the system. Operate the
spray gun until the system is completely flushed. Be sure to set up
containers to capture the antifreeze flush water.
Dispose of the antifreeze and flush water properly.
26