1. Manuals
  2. Brands
  3. Ironton Manuals
  4. Lawn and Garden Equipment
  5. 2682050
  6. Owner's manual

Ironton 2682050 Owner's Manual

Sprayer for outdoor use with agricultural pesticides and other liquids
Hide thumbs
Table of Contents

Advertisement

Quick Links

Instructions for Assembly, Testing, Operation, Servicing, and Storage
Ironton Sprayer: For outdoor use with agricultural pesticides and other liquids**
READ and UNDERSTAND the Owner's Manual completely before using this sprayer.
Assemble, test, and use only in accordance with the Owner's Manual instructions.
READ and FOLLOW chemical label instructions. Pesticides are hazardous chemicals.
KNOW emergency procedures BEFORE handling chemicals. Sprayer leaks, bodily chemical
contact, poisoning, and spills require immediate response.
AVOID inhaling, ingesting, or coming into contact with any chemicals.
WEAR personal protective gear when filling, using, cleaning, and servicing the sprayer.
KEEP sprayer and spray materials away from children and pets. Pesticides are especially toxic
to them.
EXERCISE CAUTION in vehicle handling when towing/hauling a filled sprayer to avoid loss of
control or sprayer overturning.
DO NOT TURN ON POWER to sprayer until ready to spray in order to avoid unintentional spray
release.
Improper use of the sprayer or handling of chemicals could result in serious injury or illness to
the operator or nearby persons/animals, or could cause damage to the environment.
** This sprayer is recommended for use in spraying non-flammable liquids such as pesticides,
water for plants/trees or dust control, or water-based non-flammable sealants or stains for outdoor
wood surfaces. However, WE RECOMMEND THAT THE SPRAYER NOT BE USED FOR
OTHER PURPOSES ONCE IT HAS BEEN USED FOR SPRAYING PESTICIDES. Any
chemical will leave some residual in the tank liner or sprayer components, even after the sprayer
has been properly cleaned. These residual chemicals can have unexpected effects on future uses.
For example, spraying water or other liquids that are contaminated with residual pesticide may
result in unforeseen hazards to plant or animal life.
Any Questions, Comments, Problems, or Parts Orders
Owner's Manual
WARNING
Call Ironton Product Support 1-877-234-6869.
M2682050A.1
MODEL NUMBER: 2682050
___________
SERIAL NUMBER:

Advertisement

Table of Contents
loading

Summary of Contents for Ironton 2682050

  • Page 1 SERIAL NUMBER: Owner’s Manual Instructions for Assembly, Testing, Operation, Servicing, and Storage Ironton Sprayer: For outdoor use with agricultural pesticides and other liquids** WARNING READ and UNDERSTAND the Owner’s Manual completely before using this sprayer. Assemble, test, and use only in accordance with the Owner’s Manual instructions.
  • Page 2 Table of Contents...

  • Page 3: Table Of Contents

    Table of Contents Intended Use ........................... 4 Summary of Important Safety Information ................5 During Assembly During Operation  General Chemical Safety  Chemical Application Safety  ATV Vehicle Handling Safety  Chemical Accident Procedures Warning Label Location ......................8 Unpacking Components ........................

  • Page 4: Intended Use

    For example, spraying water or other liquids that are contaminated with residual pesticide may result in unforeseen hazards to plant or animal life. Contact Ironton Product Support at 1-877-234-6869 for any questions about the appropriate use of the sprayer and/or optional accessories.

  • Page 5: Summary Of Important Safety Information

    Summary of Important Safety Information WARNING Read and understand this owner’s manual completely before using the sprayer. Read each chemical label’s instructions before handling the chemical. Improper use of the sprayer or handling of chemicals could result in serious injury or illness for the operator or nearby persons/animals, or cause damage to the environment.

  • Page 6: Chemical Application Safety

    Summary of Important Safety Information Chemical Application Safety Before Spraying  INSPECT and PREPARE sprayer before each use as directed in this manual.  DO NOT TURN ON POWER to sprayer until ready to spray in order to avoid unintentional spray release. ...

  • Page 7: Chemical Accident Procedures

    Summary of Important Safety Information Chemical Accident Procedures Immediate response is necessary in the event of sprayer leaks, bodily chemical contact, poisoning, or spills. See instructions below: Sprayer leak If the sprayer develops a leak, immediately stop spraying. Turn off power to the sprayer and follow directions below, as applicable.

  • Page 8: Warning Label Location

    Always make sure safety labels are in place and in good condition. If a safety label is missing or not legible, order new labels or unsafe operation could result. To order replacement safety labels, call Ironton Product Support at 1-877-234-6869.

  • Page 9: Unpacking

    Note that some parts are shipped inside the tank.  If you have damaged components: Contact the freight company that delivered the unit and file a claim.  If you have missing components: Contact Ironton Product Support at 1-877-234-6869. Manual Bag Sprayer Spot Spray Gun (Qty 1)

  • Page 10: Unpacking The Manual Bag

    Unpacking the Manual Bag The following items are found in the manual bag. Drain Cap Gun Clip Rubber Washer Screw (Qty 1) (Qty 2) (Qty 1) (Qty 3) 37680 778560 5232 779779 Hose Guide Remote Switch Hose Clamp (Qty 1) (Qty 1) (Qty 2) 779777...

  • Page 11: Assembly

    Assembly Step One: Attach lance clips to tank Fasten the two lance clips to the sprayer tank with screws. Gun clip Screw Step Two: Attach drain cap to tank Press the rubber washer into the drain cap with your finger. Thread the drain cap onto the tank.

  • Page 12: Step Three: Attach Gun Hose To Pump

    Assembly Step Three: Attach gun hose to pump 1. Slide hose clamp over one end of the gun hose. 2. Push the hose onto the pump hose barb. 3. Slide the hose clamp over the hose barb. 4. Tighten the hose clamp. Hose Barb Hose Clamp Gun Hose...

  • Page 13: Step Five: Attach Gun Hose To Spray Gun

    Assembly Step Five: Attach gun hose to spray gun 1. Slide hose clamp over the end of the gun hose. 2. Push the hose onto the gun hose barb. 3. Slide the hose clamp over the hose barb. 4. Tighten the hose clamp. Hose barb Spray gun Hose clamp...

  • Page 14: Step Seven: Connect Remote Switch To Vehicle Battery

    Assembly Step Seven: Connect remote switch to vehicle battery WARNING Batteries are hazardous because they contain caustic acid, can emit explosive gases, and can cause electric shock. Caution must be exercised when making connections to a battery to avoid shock and contact with the acid, and to prevent any sparking that could lead to an explosion.

  • Page 15: Step Eight: Check And Test Completed Assembly

    Assembly 5. Attach sprayer to If you have not yet mounted the sprayer to your vehicle, do so at this time following the instructions in “Step Six: Attach Sprayer to Vehicle”. vehicle if you haven’t 6. Disconnect after use AFTER EACH USE, disconnect power to the sprayer by disconnecting the sprayer’s pump cord from the remote switch –...

  • Page 16: Machine Components

    Machine Components: Model (2682050) Hose Wrap. The hose wrap is built into the tank and provides a storage location for the gun hose Gun Hose. The gun hose transfers chemical from the pump to the spray gun. Fill Cap. The fill cap has a vent to allow air to enter the tank as the chemical is dispensed.

  • Page 17: Operation-Important Safety Information

    Operation – Important Safety Information Now that you have completed and tested your assembly, there is some important safety and health information you need to know with regard to handling and spraying chemicals, as well as vehicle handling with the sprayer attached. WARNING Carefully read and make sure you understand the following safety information before using the sprayer.

  • Page 18: Chemical Application Safety

    Operation – Important Safety Information (continued) Chemical Application Safety: WARNING Caution must be used when spraying chemicals to avoid unsafe exposure to humans and the environment. Heed the warnings below and follow all instructions carefully. Before Spraying  Sprayer prep. ALWAYS inspect and prepare the sprayer before use according to the directions provided in this manual.

  • Page 19: Atv Vehicle Handling Safety

    Operation – Important Safety Information (continued) ATV Vehicle Handling Safety: WARNING Serious injury can occur if the ATV on which the sprayer is mounted is driven unsafely.  Driver age. You must be 16 years of age or older to operate the ATV with the sprayer attached.
  • Page 20 Operation – Important Safety Information (continued) Poisoning by In case of poisoning from ingestion or inhalation: ingestion or inhalation IF THE VICTIM HAS COLLAPSED OR IS NOT BREATHING, CALL 911. Otherwise: 1. If you are the victim, immediately seek assistance from nearby personnel because you may become incapacitated.

  • Page 21: Preparing The Sprayer For Each Use

    Inspect tank and fittings for cracks and leaks. Replace all damaged fittings with original Ironton parts. Check to be sure retaining nut on gun nozzle is tight. Check to be sure all other nuts, bolts, and screws are tight.

  • Page 22: Step One: Assess Wind Conditions And Clear Work Area

    Operation – Using the Sprayer Step One: Assess wind conditions and clear work area. Before you decide to spray, you must determine whether wind conditions are suitable. You must also restrict access to the work area to ensure the safety of bystanders. WARNING Do not spray if wind speeds are greater than 4 MPH or if there are bystanders in the intended spray area.
  • Page 23 Operation – Using the Sprayer (continued) Ensure tank is flushed of all chemicals from prior uses. 6. Ensure tank flushed - Chemicals can interact dangerously when mixed, and residue chemicals are also a health hazard. 7. Check drain Before filling tank, ensure drain cap is securely tightened. Drain cap 8.

  • Page 24: Step Three: Operate The Sprayer

    Operation – Using the Sprayer (continued) Step 3: Operate the sprayer. WARNING ALWAYS wear personal protective equipment as directed on the chemical label when spraying. Long pants and sleeves, chemical-resistant gloves, and eye protection are strongly recommended. Additional protective gear may be required depending on the particular pesticide. Review the “Operation –...

  • Page 25: Step Four: Clean Sprayer And Decontaminate After Use

    Operation – Using the Sprayer (continued) Step Four: Clean sprayer and decontaminate after use. When done using the sprayer, it is important to clean the sprayer and decontaminate yourself. Do not store the sprayer with chemicals in the tank, as it is unsafe and could also result in damage to the equipment.

  • Page 26: Storage

    Storage Prepare the sprayer for end-of-season storage by running RV antifreeze through the system. This will keep internal parts lubricated, protect against corrosion, and keep the unit from freezing. CAUTION The sprayer will be damaged if it freezes. Protect the sprayer from freezing during storage by following the instructions below. Preparing for storage: 1.

  • Page 27: Troubleshooting

    Troubleshooting WARNING Before troubleshooting or attempting to service, read the following safety rules to avoid accidental exposure to chemical and also risk of electric shock. Note: A reserve, clean container capable of holding at least 8 gallons should be kept for use when the sprayer tank needs to be emptied temporarily for repairs.

  • Page 28: Specifications

    The manufacturer reserves the right to make improvements in design and/or changes in specifications at any time without incurring any obligation to install them on units previously sold. Any Questions, Comments, Problems or Parts Orders Call Ironton Product Support 1-877-234-6869...

  • Page 29: Parts Breakdown - Exploded View

    Exploded View–2682050 –Rev A.1 Ref# Part# Description 777493 Wire Harness w/ remote switch 790659 Sprayer Pump 780546 M5 x 15mm screw 3/8” hose clamp 30746 791073 Inlet Hose, 60mm 784519 Tube seal 784521 Suction Tube 780544 Suction strainer 790867 Tank Cap...
  • Page 30 This page is intentionally left blank...

  • Page 31: Limited Warranty

    Ironton. Ironton will not provide for replacement of complete products due to defective parts. Any costs incurred due to replacement or repair of items outside of an Ironton approved facility is the responsibility of the buyer and not covered under warranty.
  • Page 32 Distributed by Northern Tool + Equipment Co., Inc Burnsville, MN 55306 NorthernTool.com...

Table of Contents