Operating Mode - Nibe F750 User Manual

Setting
1. Tick "use proxy" if you do not want to use a proxy.
2. Mark "server" and press the OK button.
3. Enter the correct details via the virtual keypad.
4. Mark "OK" and press the OK button.
5. Repeat 1 - 3 for "port", "user name" and "password".
6. Mark "confirm" and press the OK button.
TIP
All settings made since opening the menu can be reset by marking "reset"
and pressing the OK button.
sms (accessory is required)
Menu
Make settings for the accessory SMS
4.1.4
40 here.
Add the mobile numbers that are to
have access to change and receive
status information from the heat
pump. Mobile numbers must include
country code e.g. +46 XXXXXXXX.
If you want to receive an SMS mes-
sage in the event of the alarm mark
the box to the right of the telephone
number.
NOTE
Telephone numbers provided must be able to receive SMS messages.

operating mode

Menu
4.2
operating mode
Setting range: auto, manual, add.
heat only
Default value: auto
functions
Setting range: compressor, addi-
tion, heating
58 Chapter 3 | F750 – at your service NIBE™ F750