Specifications - Peavey GPS 900 Operation Manual

OUTPUT POWER: (Typical value)
2 Ohms, 1 kHz, .1 THD
4 Ohms, 1 kHz, .1 THD
8 Ohms, 1 kHz, .1 THD
4 Ohms, 1 kHz, .1 THD
8 Ohms, 1 kHz, .1 THD
RATED OUTPUT POWER:
4 Ohms, 20 Hz to 20 kHz,0.03% THD
8 Ohms, 20 Hz to 20 KHz,0.02% THD
SLEW RATE: (Typical value)
Stereo mode, each channel
Bridge mode, mono
INPUT SENSITIVITY AND IMPEDANCE:
Input attenuator set @ FCW
@ rated output power, 4 Ohms
Unbalanced, 1/4" phone jack
Balanced, XLR (phase selectable)
Overall system gain per channel
FREQUENCY RESPONSE: (Typical)
+0,-1 dB, 1 WRMS, 4 Ohms
+0,-0.2 dB @ rated output, 4 Ohms
DAMPING FACTOR: (Typical value)
8 Ohms, 1 kHz
HUM AND NOISE:
Below rated output power, 4 Ohms
POWER CONSUMPTION:
@ 1/8 rated power @ 2 Ohms
WEIGHT:
GPS ™

900 SPECIFICATIONS

Stereo mode, both channels driven
- 450 WRMS per channel
- 330 WRMS per channel
- 200 WRMS per channel
Bridge mode, mono
- 900 WRMS
- 660 WRMS
Stereo mode, both channels driven
- 300 WRMS per channel
- 170 WRMS per channel
- 40 Volts per usec
- 80 Volts per usec
- 0.90 VRMS (-1 dBV)
- 20 k Ohms
- 10 k Ohms per leg
- 40X (+32 dB)
Stereo mode, both channels driven
- 5 Hz to 50 kHz
- 20 Hz to 20 kHz
Stereo mode, both channels driven
- Greater than 400
Stereo mode, both channels driven
- 100 dB @ 120 Volts
Stereo mode, both channels driven
- 540 Watts @ 120 VAC
- 35.8 lbs. (16.2 kg)
Specifications subject to change without notice.
15