Table of Contents
Advertisement
SPECIFICATIONS
CHARACTERISTICS:
{@
120 V AC, 60 Hz)
Output Power: (Typical Value)
Stereo mode, both channels driven
2 ohms, 1 kHz, 1% THD
4 ohms, 1 kHz, 1% THD
8 ohms, 1 kHz, 1% THD
Bridge mode, mono
4 ohms, 1 kHz, 1%THD
8 ohms, 1 kHz, 1% THD
Rated Output Power:
Stereo mode, both channels driven
4 ohms, 20 Hz to 20 kHz, 0.03% THD
8 ohms, 20 Hz to 20 kHz, 0.02% THD
Power Bandwidth: (Typical Value)
Stereo mode, both channels driven
(S) rated power, 4 ohms, (0.1% THD)
Slew Rate: (Typical Value)
Stereo mode, each channel
Bridge mode, mono
Total Harmonic Distortion: (Typical)
Stereo mode, both channels driven
20 Hz to 20 kHz, 4 ohm rated output
600 W RMS per chan
420 W RMS per chan
260 W RMS per chan
1200 W RMS
840 W RMS
400 W RMS per chan
240 W RMS per chan
10 Hz to 50 kHz
40 Volts per uSec
80 Volts per uSec
Less than 0.03%
Input Sensitivity & Impedance:
Input attenuator set @ FCW
@ rated output power, 4 ohms
1.4 V RMS (+3 dBV)
20 K Ohms (+29 dB)
Advertisement
Table of Contents
