Advertisement
2
1
5
3
1 1
FIGURE 1A (Front View)
1. Reverse connection indicator
2. Good connection indicator
3. 12 Volt DC Accessory Socket with 20 amp overload protection
4. Battery Level Push Button
5. LED Charging/Battery Level Indicators
6. Heavy-Duty Welding Quality Jumper Cables
7. Heavy-Duty 450 Amp Clamps
8. 110/120 Volt UL approved AC/DC Charging Adapter
9. 12 Volt DC/DC Charging Adapter
10. Light ON/OFF Switch
11. AC Recharge Adapter barrel connector receptacle
12. Area Worklight
ADDITIONAL FEATURES
Includes non-spillable, maintenance-free, heavy-duty, new high energy density 19 Amp
•
hour, sealed battery
Sturdy and unique compact design provides portable 12 Volt DC power
•
Safe to use, transport, and store
•
Requires no maintenance (other than recharging) for optimum operation
•
Automatic taper charge for AC recharge
•
Audible alarm for reverse polarity
•
Molded high-impact case is tough and durable
•
Built-in emergency/worklight with long-lasting LED's for roadside repairs and use in
•
remote locations without utility power
CAUTION: Only use the charging systems supplied with the West Marine Jumpstart
400 Mk2.
5
8
9
1 0
4
1 2
FIGURE 1B (Rear View)
USING THE JUMPSTART 400 Mk2 SYSTEM
WARNING:
1.
Before using this system to jumpstart any vehicle or boat, read and understand all
instructions, safety tips, warnings, cautions and first aid information provided in
this manual and on the product labeling. Additional important information may also
be provided by the vehicle's battery system manufacturer.
2.
Be aware of first aid procedures before attempting jumpstart procedure.
3.
Always wear protective eyewear when working with a lead acid-type battery.
6
4.
Do not smoke or use inflammable items (matches, cigarette lighters, etc.) while
working on a vehicle's battery system.
5.
When using this jumpstarter in proximity to the vehicle's battery and engine, stand
the unit on a flat, stable surface, and be sure to keep all cords and cables away
from any moving parts.
6.
Check unit periodically for wear and tear. Replace worn or defective parts immedi-
7
ately; contact the Customer Service Department toll-free: (866) 584-5504.
7.
Do not attempt to jumpstart a frozen battery.
8.
NEVER submerge this unit in water.
9.
Do not wear vinyl clothing when jumpstarting a vehicle, friction can cause dangerous
static electricity sparks. Remove all jewelry or metal objects-they can cause short cir-
cuits or react with battery acid to cause severe burns. Remove or secure any loose
clothing, and restrain long hair, before attempting jumpstart procedure.
1 0 . Lead-acid batteries generate hydrogen gas during normal operation. More gas is
generated when the battery is charging. Hydrogen gas is explosive, poisonous
to breathe and highly flammable. Always make sure to use product in a well-
ventilated area.
Recommendations for optimum performance of the JUMPSTART 400 Mk2:
CAUTION:
1.
To avoid possible damage that may shorten the unit's working life, protect this unit
from direct sunlight, direct heat and moisture.
2.
This system is to be used ONLY on vehicles, boats, garden tractors and gasoline
powered generators with 12 Volt DC battery systems.
3.
This system is NOT designed to be installed as a replacement for a vehicle battery.
4.
Vehicles that have on-board computerized systems may be damaged if vehicle b a t t e ry
is jumpstarted. Before Jumpstarting this type of vehicle, read the vehicle owner's
manual to confirm that external-starting assistance is advised.
5.
Excessive engine cranking can damage the vehicle' s starter motor. If the engine fails
to start after the recommended number of attempts, discontinue jumpstart procedure
and look for other problems that may need to be corrected.
6 .
This JUMPSTA RT 400 Mk2 is equipped with an internal, automatic safety switch. T h i s
switch only activates when connections to the battery are correctly made p o s i t i v e
(+) to positive (+) and negative (-) to negative (-). An incorrect connection will sound
an audible alarm indicating an incorrect connection. Should this alarm sound,
remove the clamps and reconnect ensuring proper polarity. Once the connections
are properly made, the internal switch turns on and you are ready to jumpstart the
vehicle. This automatic internal safety switch is fully automatic and requires no
action by the user.
6
Advertisement
