Customer Service; Troubleshooting Guide - Dirt Devil M082600 Owner's Manual

WARNING: TO REDUCE RISK OF PERSONAL INJURY
-
UNPL
Problem
I
Possible Reasons
Cleaner won't run
Cleaner won't pick-up
or low suction
1. Power cord not firmly plugged into outlet.
2. Cord not connected to cleaner.
3. Blown fuse or tripped breaker
.
4. Needs service.
1
.
D irt container not installed correctly.
2. Dirt container full.
3. Brush roll worn.
4. Broken or worn belt
5. Clogged filter.
6. Nozzleldirt passage hose clogged.
7. Proper speed not selected.
8. Brush roll is turned off.
Dust escaping from cleaner
1. D irt Container full.
2. Dirt Container not installed correctly.
3. Hose not installed correctly.
4. Handle seal.
Cleaner tools won't pick up 1. Hose clogged.
2. Hose inlet clogged.
3. Dirt container full.
4. Filter clogged.
Possible Solutions
1. Plug unit in firmly.
2
.
Connect cord to cleaner
-
Pg. 5.
3. Check fuse or breaker. Replace fu selreset breaker.
4. Take to service center or call 1-800-321-1 134.
1
.
Review Dirt Container Removal and Replacement-Pg 6.
2. Empty Dirt Container-Pg. 6.
3. Replace brush roll-Pg. 7.
4. Replace belt-Pg. 7.
5. Rem ove filter and clean-Pg. 6.
6. Remove base nozzle cover; remove obstruction OR
6. Remove hose; remove obstruction.
7. Sel ect speed
-
Pg. 5.
8. Tum brush roll on
-
Pg. 5.
1. Empty Dirt Container-Pg. 6.
2.
Review Dirt Container Removal and Replacement-Pg. 6.
3. Review Hose Installation-Pg. 5.
4. Check handle assembly.
1. Remove hose and tools; remove obstruction-Pg. 5
2. Remove hose and clean inlet.
3. Em pty dirt container-Pg. 6.
4. CI ean filter-Pg. 6.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE (1 -800-321 -1 134)
In the event that further assistance is required,
see your Yellow Pages for an authorized Royal Dealer. Costs of any transport ation to
and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily
available
from an authorized Royal Dealer or retailer.
Always identify your cleaner by the model number when requesting information or o rder-
ing replacement parts. (The model number appears on the bottom of the cleaner.)