Specifications - LG 50PM1M Service Manual

RCA Type
REMOTE
RGB OUTPUT
CONTROL
RS-232C INPUT
HDMI/DVI
AUDIO INPUT RGB INPUT
(VIDEO) INPUT
(CONTROL/SERVICE)
1 2
Scart Type
REMOTE
RGB OUTPUT
CONTROL
RS-232C INPUT
HDMI/DVI
AUDIO INPUT RGB INPUT
(CONTROL/SERVICE) (VIDEO) INPUT
1. RS-232C INPUT(CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
2. HDMI/DVI (VIDEO) / AUDIO INPUT / RGB INPUT SOCKETS
Connect the monitor output socket of the PERSONAL COM-
PUTER to this socket.
Note: If you want to use RGB/DVI audio, we strongly recom-
mend that you use the cable that has a core, or the EMI Filter
core along with separate cable.
RGB OUTPUT SOCKET
You can watch the RGB signal on another set, connect RGB
OUTPUT to another monitor's PC input port.
REMOTE CONTROL
VARIABLE AUDIO OUTPUT
3. EXTERNAL SPEAKER OUTPUT (8 ohm)
Connect to optional external speaker(s).
* For further information, refer to 'Speaker & Speaker Stand'
manual.
<Back Panel>
AUDIO
R L
R
L
EXTERNAL SPEAKER
VARIABLE AUDIO OUT
3
AUDIO
R L
R L
EXTERNAL SPEAKER
VARIABLE AUDIO OUT
COMPONENT INPUT 2 MONITOR OUPUT
COMPONENT INPUT 1 A/V INPUT
Y P P
B R R L
VIDEO AUDIO Antenna
4
VIDEO
AUDIO
Y P P L R
B R
COMPONENT INPUT
(MONO) AV3
S-VIDEO VIDEO
Antenna
4
4. COMPONENT / AUDIO INPUT SOCKETS
S-VIDEO / AUDIO (L/MONO) INPUT SOCKETS
VIDEO / AUDIO (L/MONO) INPUT SOCKETS
ANTENNA INPUT
EURO SCART SOCKET
Connect the euro scart socket of the VCR to these sockets.
Note:
a. If you want to use the EURO scart cable, you have to use
the signal shielded Euro scart cable.
b. If you want to use your external hi-fi stereo system, turn off
the internal speakers of the set.
5. POWER CORD SOCKET
This set operates on an AC power. The voltage is indicated on
the Specifications page. Never attempt to operate the set on
DC power.
- 7 -
R L (MONO) R L (MONO)
AUDIO VIDEO S-VIDEO AUDIO
AV1 AV2
AV1 AV1
AC INPUT
5
AC INPUT