Specifications - LG 71PY1M Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
Application Range
V
This spec is applied to the 71" PLASMA MONITOR used PM61A Chassis.
Chassis
PM61A
Specification
V
Each part is tested as below without special appointment.
1) Temperature : 25±5°C
2) Relative Humidity: 65 ± 10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
Test Method
V
1) Performance : LGE TV test method followed.
2) Demanded other specification
Safety: UL, CSA, CE, IEC specification
EMC : FCC, ICES, CE, IEC specification
Model
71PY1M-WA
71PY1MG-WA
General Specification
V
1. Set Specification
No Item
1 Video input applicable system
2 Available Channel
3 Input Voltage
4 Market
5 Screen Size
6 Aspect Ratio
7 PDP Module
8 Screen Filter (Light Transmittance)
9 Operating Environment
10 Storage Environment

SPECIFICATIONS

Model Name
71PY1M-WA
71PY1MG-WA
Market
WORLD WIDE Safety : UL1950, CSA 1950
EMC : FCC PART 15 Class B
NTSC-M, PAL, SECAM, NTSC4.43, PAL-N, PAL-M
100 -240~ VAC , 50/60Hz
All of the WORLD
71 inch wide
16:9
PDP71H20000 (1920X1080)
45% Total light transmittance(E-Mesh)
1) Temp. : 0 ~ 40 deg
2) Humidity : 0 ~ 80 %
1) Temp. : -20 ~ 60 deg
2) Humidity : 0 ~ 85 %
Market
World wide
Appliance
Specification
- 9 -
Brand Remark
LGE CLASS B
Remark
TEST Not Applied
Remark
71PY1M-WA : 110V~220V
71PY1M-WA
LGE
Maker: LG
LGE spec