Nap Mode - RCA RP3712 User Manual

Operating the Clock Radio

Nap Mode

EN
This function works as a reminder and
wake you up after a short period of time.
Simply:
1. Activate Nap function. Press
Then NAP indicator flashes.
2. Set nap time
3. The nap time range is from 10 minutes
to 2 hours in 10 minutes interval.
4. The nap time setting is complete.
5. The display will be switched back to the
real time display after 4 seconds if there
is no further activation of keys.
6. Read the remaining time when the clock
is back to the real time
7. Cancel the setting. Press and hold
until the nap indicator disappears.
• Only alarm can be selected.
• If the radio is currently on, then the
radio will be turned on again when the nap
setting is deactivated provided that you
press to turn off the alarm.
Snooze Alarm Operation
To take an extra sleep time after the alarm
6
3712 US IB(EN)
sounds or the radio comes at the wake
time, press
or alarm. About 9 minutes (default time),
the radio or alarm will sound again.
Snooze function can be used repeatedly
once.
for 2 hours.
Set the Snooze Duration
1. Press and hold
2. Set the interval time. Press
The interval time period is from 1
minute to 30 minutes. Release button
to confirm the setting.
3. When snooze function is activated next
time, the setting is the same as the one
you have set before.
Turn off Alarm / Nap
Silence alarm/nap temporarily
Press
when the snooze period is over
Stop alarm
Press . When the alarm indicator is
OFF
lit, the radio or alarm will turn on again at
the same time tomorrow.
Stop nap
Press or
OFF
7
to silence the radio
. The unit sounds again
11/12/01, 5:05 PM