Sleeping Mode - RCA RP3712 User Manual

Operating the Clock Radio
Wake to Alarm
1. Set wake time. Following steps under
"Setting Wake Time".
2. Press to select Wake to Alarm.
3. The alarm indicator will be lit.
4. The setting is complete.
5. Cancel the setting. Press and hold
until the alarm indicator disappears.
• The unit equips with
GRAD-U-WAKE GRAD-U-WAKE GRAD-U-WAKE GRAD-U-WAKE feature under GRAD-U-WAKE
Wake to Alarm. The alarm tone volume
will increase gradually to its maximum
in about 30-45 seconds.
• If you do not cancel the wake time set-
ting, the unit will turn on at the preset
time tomorrow.

Sleeping Mode

You may set your digital clock to lull you
to sleep.
1. Press and hold
2. Set sleep time
3. The time range is between 1 minute
and 2 hour.
3712 US IB(EN)
4. Select between AM and FM
5. Press once to set channel frequency or
press momentarily to search channel
freuency automatically
6. Adjust volume
7. Read the remaining time when the clock
is back to the current time
8. Turn off the radio before the preset
time. Press
9. When the sleeping mode is activated
next time, the time setting and the
channel frequency are the same as the
one you have set before.
Sleeping Mode and Wake to
Music or Alarm
Your digital clock may lull you to sleep and
wake you up at the preset time.
1. Set wake time (follow steps under "Set-
ting Wake Time")
2. Refer to "Waking by Selected Source
Programme".
3. Follow the procedures under "Sleeping
Mode".
6
EN
RADIO
OFF
5
11/12/01, 5:05 PM