Zte S160 Quick Start Manual

LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
ZTE S160
translated or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the
CDMA 1X Digital Mobile Phone
prior written permission of ZTE Corporation.

Quick Start Guide

The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specifications without prior notice.
Version No. : R1.0
Edition Time : 2011.11
Manual No. : 079584504068
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057 Tel: (86) 755 26779999
URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn
1 2
S160 QSG（Bengal）V1.0-111123.indd 1
Phone Overview Key Functions
Key Function Description
• Make or answer a call.
Call Key • Press the Call Key in standby mode to enter All
Earphone
Calls list.
• End an active call or reject a call.
Headset Jack
End Key • Long press to power on/power off the phone.
• Exit from any interface to standby mode.
LCD Screen
• Switch to the options at lower left of the phone
Left Soft screen.
Navigation Keys
OK Key Key • In standby mode, press the Left Soft Key to
enter the main menu.
• Enter all contacts list of the phonebook in
Left Soft Key Right Soft Key
Right Soft standby mode.
Call Key End Key
Key • Switch to the options at lower right of the phone
screen.
Number Keys
• Move the cursor up, down, left and right.
• In standby mode, used as hot keys to enter the
* # Key
Key designated functions.
Navigation • In PhoneBook list, press the Left Key or Right
Microphone
Keys Key to switch groups.
Charger Jack • Press the Left Key or Right Key to adjust
volume in conversation.
• Used as direction keys in games.
3 4
Installing the Battery
Key Function Description
• Confirm the commands and options selected.
Install the battery as shown below.
• Confirm the character chosen while inputting
OK Key character.
• In standby mode, press the OK Key to enter
the Freedom menu.
• Key in numbers or characters.
0 ~ 9 • Press and hold the 0 Key to input + in standby
Number mode.
Inserting the UIM Card
Keys • Make a speed dial call (2–9) in standby mode.
Insert the UIM card as shown below.
• Press to enter corresponding submenu.
• Press the # Key to select text mode when edit
# Key text.
• Press and hold # Key to active vibration mode.
• Press and hold the * Key in standby mode to
lock phone's keypad.
* Key
• Press the * Key once to enter symbols in text
input mode.
Charging Your Phone
Open the Back Cover 1. Insert the lead from the charger to the socket, and connect
the charger to a standard wall AC socket.
Remove the back cover as shown below.
5 6
2. After the completion of charging, disconnect the charger When the keypad is locked, calls may be possible to the official
from the phone and AC socket. emergency number programmed into your device.
Switching On/Off Phone Code
1. Press and hold the End Key to switch on/off your phone. Phone could prevent your phone from illegal use. The default
2. The phone will automatically search for available networks. phone code is 0000. Please change it to your own as soon as
possible.
Indicators and Icons
Notes:
Icon Description Icon Description Please remember the code; otherwise some service expense
may happen.
Signal strength Battery indicator
PIN and PUK
New SMS Silence mode
PIN Code
PIN code could prevent your UIM card from illegal use. When
Vibrate mode Alarm
PIN lock is on, you should enter the PIN code when powering
on the handset again. The network provider offers you PIN code
Outdoor mode
(four to eight digits). You should change PIN code as soon as
possible for security.
Keypad Lock
PUK Code
If you activate Auto Keypad Lock, the keypad will be locked
Consecutive inputting wrong PIN code for three times can cause
automatically according to your settings.
locking of UIM card. To unlock, you need PUK code.
Press and hold the * Key to lock the keypad in standby mode.
Notes:
If you want to unlock the keypad, please press the Right Soft
PIN code and PUK code may be offered together with the
Key first, and then the * Key.
UIM card. If not, please contact your network service provider.
Notes:
Please change default PIN code to your own as soon as
If the call is coming when the keypad is locked, you can press
possible.
the Call Key to answer.
7 8
Text
Your phone offers text input modes: abc, Abc, ABC, 123, eZi
and Symbols.
Operation Method
Change Press the # Key to select another text mode,
input mode press the * Key to enter the symbols mode.
In the abc/Abc/ABC mode, press corresponding
Input Letters
letter key till the letter appears.
In the eZi mode, press any key once to key in
any word. Predictive text input is based on a
built-in dictionary. When you have finished writing
Input Words the word and it is correct, confirm it by pressing
the OK Key. If the word is incorrect, press the
Up key or Down key to view other matching
words found in the dictionary.
Input Digits In the 123 mode, press digit key once.
Press the Navigation keys to switch symbols
Input and press corresponding digit key. Or press the
Symbol 1 key till the symbol (common symbols) appears
except for the 123 mode.
Input Space Press the 0 key, except for the 123 mode.
Erase
Press the Right Soft Key.
Character
Move cursor Press the Navigation keys.
9
2011-11-25 9:26:12