Zte S165 Quick Start Manual

LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
ZTE S165
translated or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the
CDMA 1X Digital Mobile Phone
prior written permission of ZTE Corporation.

Quick Start Guide

The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specifications without prior notice.
Version No. : R1.0
Edition Time : 2011.10
Manual No. :
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057 Tel: (86) 755 26779999
URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn
1 2

Phone Overview

Key Function Description
• Switch to the options at lower left of the LCD.
Left Soft
Earphone • In standby mode, press the Left Soft Key to
Key
enter the main menu.
LCD Screen Right Soft • Enter All of PhoneBook in standby mode.
Key • Switch to the options at lower right of the LCD.
Navigation Keys • Move the cursor up, down, left and right.
OK Key
• In standby mode, Used as hot keys to enter the
Left Soft Key Right Soft Key
designated functions.
Call Key End Key • In PhoneBook list, press the Left Key or Right
Charger Jack Navigation Key to switch groups.
Number Keys
Keys • Press the Left Key or Right Key to adjust
volume in conversation.
* # Key
Key
• Press and hold the Down Key to turn on/off the
LED Light.
• Used as direction key in games.
LED Light
Microphone
• Confirm the commands and options selected.
Key Functions • Confirm the character chosen while character
OK Key inputting.
Key Function Description • In standby mode, press the OK Key to enter
the Freedom menu.
• Make or answer a call.
Call Key • Press the Call Key in standby mode to enter
• Key in numbers or characters.
All Calls list.
0 ~ 9 • Press and hold the 0 Key to input + in standby
Number mode.
• End an active call or reject a call.
Keys • Make a Speed Dial call (2–9) in standby mode.
End Key • Long press to Power on/Power off.
• Press to enter corresponding submenu.
• Exit from any interface to standby mode.
3 4

Inserting the UIM Card

Key Function Description
Insert the UIM card as shown below.
• Press the # Key to select text mode when edit
# Key

text.

• Press and hold # Key to active vibration mode.
• Press and hold the * Key in standby mode to
lock phone's keypad.
* Key
• Press the * Key once to enter symbols in text
input mode.

Charging Your Phone

Open the Back Cover

Remove the back cover as shown below. 1. Insert the lead from the charger to the socket, and connect
the charger to a standard wall AC socket.

Installing the Battery

Install the battery as shown below.
2. After the completion of charging, disconnect the charger
from the phone and AC socket.

Switching On/Off

1. Press and hold the End Key to switch on/off your phone.
2. The phone will automatically search for available networks.
5 6

Indicators and Icons

Notes:
Please remember the code; otherwise some service expense
Icons Description Icons Description
may happen.
Signal strength Battery indicator

PIN and PUK

PIN Code
New SMS Silence mode
PIN code could prevent your UIM card from illegal use. When
PIN lock is on, you should enter the PIN code when powering
Vibrate mode Alarm
on the handset again. The network provider offers you PIN code
Ring + Vibrate mode (four to eight digits). You should change PIN code as soon as
possible for security.
Keypad Lock
PUK Code
If you activate Auto Keypad Lock, the keypad will be locked Consecutive inputting wrong PIN code for three times can cause
automatically according to your settings. locking of UIM card. To unlock, you need PUK code.
Press and hold the * Key to lock the keypad in standby mode. Notes:
If you want to unlock the keypad, please press the Right Soft PIN code and PUK code may be offered together with the
Key first, and then the * Key. UIM card. If not, please contact your network service provider.
Notes: If the call is coming when the keypad is locked, you can Please change default PIN code to your own as soon as
press the Call Key to answer. possible.
When the keypad is locked, calls may be possible to the official
Text
emergency number programmed into your device.
Your phone offers text input modes: abc, Abc, ABC, 123, eZi

Phone Code

and Symbols.
Phone could prevent your phone from illegal use. The default
phone code is 0000. Please change it to your own as soon as
possible.
7 8
Operation Method
Change input Press the # Key to select another text mode,
mode press the * Key to enter the symbols mode.
In the abc/Abc/ABC mode, press
Input Letters corresponding letter key till the letter
appears.
In the eZi mode, press any key once to key
in any word. Predictive text input is based on
a built-in dictionary. When you have finished
writing the word and it is correct, confirm
Input Words
it by pressing the OK Key. If the word is
incorrect, press the Up key or Down key
to view other matching words found in the
dictionary.
Input Digits In the 123 mode, press digit key once.
Press the Navigation keys to switch
symbols and press corresponding digit key.
Input Symbol
Or press the 1 key till the symbol (common
symbols) appears except for the 123 mode.
Input Space Press the 0 key, except for the 123 mode.
Erase Character Press the Right Soft Key.
Move cursor Press the Navigation keys.
9