Zte S165 User Manual

LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated
ZTE-C S165
or utilized in any form or by any means, electronic or mechanical, in-
CDMA 1X Digital Mobile Phone cluding photocopying and microfilm, without the prior written permis-
sion of ZTE Corporation.

User Guide

The manual is published by ZTE Corporation. We reserve the right
to make modifications on print errors or update specifications without
prior notice.
Version No. : R1.1
Edition Time : 2013.05
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057 Tel: (86) 755 26779999
URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn
1 2
Phone Overview
• End an active call or reject a call.
End Key • Long press to Power on/Power off.
• Exit from any interface to standby mode.
Left Soft Key • Switch to the options at lower left of the LCD.
• Access the Contacts screen in standby mode.
Right Soft Key
• Switch to the options at lower right of the LCD.
• Move the cursor up, down, left and right.
• In standby mode, Used as hot keys to enter
the designated functions.
• In Contact list, press the Left Key or Right
Navigation Keys
Key to switch groups.
• Press the Left Key or Right Key to adjust vol-
ume in conversation.
• Used as direction key in games.
• Confirm the commands and options selected.
• Confirm the character chosen while character
OK Key inputting.
• In standby mode, press the OK Key to enter
the main menu.
Key Functions
• Key in numbers or characters.
• Hold the 0 Key to input + in standby mode.
Key Function Description
0 ~ 9 Number
• Make a Speed Dial call (2–9) in standby
Keys
• Make or answer a call.
mode.
Call Key • Press the Call Key in standby mode to enter
• Press to enter corresponding submenu.
All Calls list.
3 4
Installing the Battery
• Press the # Key to select text mode when edit
# Key
text. Install the battery as shown below.
• Hold the * Key in standby mode to lock phone'
s keypad.
* Key
• Press the * Key once to enter symbols in text
input mode.
Open the Back Cover
Charging Your Phone
Remove the back cover as shown below.
1. Insert the lead from the charger to the socket, and connect the
charger to a standard wall AC socket.
Inserting the UIM Card
Insert the UIM card as shown below.
2. After the completion of charging, disconnect the charger from the
phone and AC socket.
Switching On/Off
1. Hold the End Key to switch on/off your phone.
2. When you turn on your phone, the phone will automatically
search for available networks.
5 6
Indicators and Icons PIN and PUK
PIN Code
Icon Indication Icon Indication
PIN code could prevent your UIM card from illegal use. When PIN
Signal strength Battery indicator
lock is on, you should enter the PIN code when powering on the
handset again. The network provider offers you PIN code (four to
New SMS Silence mode
eight digits). You should change PIN code as soon as possible for
Headset mode Alarm security.
PUK Code
Keypad Lock
Consecutive inputting wrong PIN code for three times can cause
locking of UIM card. To unlock, you need PUK code.
If you activate Auto Keypad Lock, the keypad will be locked auto-
Note:
matically according to your settings.
PIN code and PUK code may be offered together with the UIM card.
Hold the * Key to lock the keypad in standby mode.
If not, please contact your network service provider. Please change
If you want to unlock the keypad, please press the Right Soft Key
default PIN code to your own as soon as possible.
first, and then the * Key.
Note: Text
If the call is coming when the keypad is locked, you can press the
Your phone offers text input modes: abc, Abc, ABC, 123, eZi and
Call Key to answer.
Symbols.
When the keypad is locked, calls may be possible to the official
Operation Method
emergency number programmed into your device.
Press the # Key to select another text mode, press
Change input
Phone & Menu Code
mode the * Key to enter the symbols mode.
Phone and menu code could prevent your phone from illegal use.
In the abc/Abc/ABC mode, press corresponding
The default phone code is 0000. Please change it to your own as Input Letters
letter key till the letter appears.
soon as possible.
Note: Please remember the code; otherwise some service expense
may happen.
7 8
In the eZi mode, press any key once to key in
any word. Predictive text input is based on a built-
in dictionary. When you have finished writing the
Input Words word and it is correct, confirm it by pressing the
OK Key. If the word is incorrect, press the Up key
or Down key to view other matching words found
in the dictionary.
Input Digits In the 123 mode, press digit key once.
Press the Navigation keys to switch symbols and
press corresponding digit key. Or press the 1 key
Input Symbol
till the symbol (common symbols) appears except
for the 123 mode.
Input Space Press the 0 key, except for the 123 mode.
Erase Char-
Press the Right Soft Key.
acter
Move cursor Press the Navigation keys.
Basic Function
Herein after are basic functions of the phone.
Contacts
• Add Contact: Add a new contact to your phone or UIM card.
• All List: View all contacts in all list, press the Left Key or Right
Key to view different groups. In all list, you can search for a
contact by entering the key words, press the OK Key to view the
details. Select Option to do more operations.
9