Table of Contents
Advertisement
camera operation
DaY/nighT : You can display pictures in color or in black and white.
❶
If the SPECIAL menu screen is displayed, use the Function Setup switch so
that the arrow indicates 'DAY/NIGHT'.
❷
Select a desired mode using the Function Setup switch according to the
picture display you want.
-
auTo : The mode is switched
BURST MODE : Activate or deactivate the burst mode to maintain or
DURATION : This function is used to select the brightness of light where
GAIN LEVEL
VERY SLOW
NORMAL
VERY FAST
※ Depending on the installation environment and the exposure menu's gain
mode setting, the switching brightness may vary.
DWELL TIME : You can select day/night switching delay time from.
M
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night mode to auto.
When a bright light source is in the screen or there are frequent brightness changes, if you use the
auto night/day mode, and set the switching time to short (3, 5 sec), a hunting can be caused. In this
situation, it is recommended to use the default setting (30 sec).
-
COLOR : The picture is always displayed in color.
-
B/W : The picture is always displayed in black and white.
2_ camera operation
to 'Color' in a normal
environment, but
switches to 'B/W' mode
when ambient illumination
is low. To set up the
switching time for AUTO mode, press the Function Setup switch. You
can turn on or off the burst signal on B/W mode.
remove the color signal.
switching occurs.
LOW
Color → B/W B/W → Color Color → B/W B/W → Color Color → B/W B/W → Color
4
4.1
SLOW
4.2
4.3
FAST
4.4
→ 3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
You can turn on or off the burst signal on B/W mode.
BURST MODE
▶
1.
DURATION
2.
DWELL TIME
3.
RETURN
4.
MID
4.9
2.4
4.8
2.8
4.7
3.2
4.6
3.6
4.5
4
AUTO SETUP
HIGH
5.4
0.7
5.2
1.5
5
2.3
4.8
3.1
4.6
3.9
ON
NORMAL
30 SEC
6
5.8
5.4
5
4.7
Hide quick links:
Advertisement
Table of Contents
