Setup.wizard - Channel Master CM-7400 User Manual

Setup Wizard
Setting.up.your.Channel.Master.TV.is.quick.and.simple...Just.follow.the.on-screen.
instructions.to.get.started..This.initial.setup.process.may.take.up.to.30.minutes...
When.ready.to.begin,.select."COnTInUE".and.press.OK.to.proceed.with.the.Setup.
Wizard.
nOTE:. The.Setup.Wizard.process.can.be.repeated.in.the.future.if.you.relocate.the.device.or.
change.TV.sources.(i.e..antenna.or.digital.cable.(Clear.QAM))...From.the.Main.Menu.
select."SETTInGS",."Restart & Reset".and."Repeat Setup Wizard".
Step 1 of 5: Setting up Date and Time
Choose.the.correct.time.zone.for.your.location..This.is.an.important.step.to.ensure.
your.TV.recordings.are.scheduled.properly.
1. Time Zone:
a.. Press.OK .to.view.a.list.of.time.zones..
b.. Use.the.ARROW KEYS.then.press.OK.to.select.your.time.zone.
2. Daylight Saving Time (DST):
6
a.. Use.the.ARROW KEYS..Select."Yes".if.your.time.zone.observes.DST.
Select."no".if.you.are.located.in.a.time.zone.that.does.not.observe.DST..
b.. Press.OK.to.select.
3. Date and Time Mode:
a.. Use.ARROW KEYS..Select."Automatic".(recommended).for.the.device.to.
manage.the.time...The.device.will.use.your.broadband.connection,.antenna,.or.
digital.cable.feed.to.get.the.most.accurate.time..Select."Manual".to.modify.the.
date.and.time.manually..
b.. Use.ARROW KEYS,.select."COnTInUE".and.press.OK.to.proceed.to.the.next.
step.
Step 2 of 5: Selecting your Display Settings
This.step.will.ensure.you.setup.your.Channel.Master.TV.device.to.output.properly.to.
your.TV...Please.select.the.output.format.and.aspect.ratio.that.matches.your.TV...
The.recommended.default.values.for.your.TV.should.be.displayed.at.initial.setup...
To.make.changes.to.the.output.format.and.aspect.ratio,.perform.the.following.steps...
1. Output Format:
a.. Press.OK.to.view.list.of.output.format.resolutions.
b.. Select.the.desired.format.and.then.press.OK..
2. Aspect Ratio:
a.. Use.the ARROW KEYS.and.then.press.OK.to.view.list.of.display.sizes.
b.. Select.the.desired.aspect.ratio.and.then.press.OK.
. If.you.enter.settings.outside.the.range.for.your.display,.the.screen.may.turn.
blank.or.become.unclear..At.this.point,.do.not.select."COnTInUE"..Leave.the.
controls.untouched.for.at.least.15.seconds.and.setup.wizard.will.return.the.
display.settings.to.their.previous.values.
c.. Use.the.ARROW KEYS..Select."COnTInUE".and.then.press.OK.to.proceed.to.
the.next.step.
7