Connecting To A Pc With Vga And 3.5 Mm Minijack - Sceptre X322BV-MQC User Manual

Connecting to a PC with VGA and 3.5 mm minijack ...

1. Make sure the power of
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the
other end to the VGA port on the back of your
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end
to the VGA Stereo Input port.
4. Turn on the power of the
Use the remote control's source button or the source button on the display to
5.
switch to PC.
6. Change your PC resolution to 1366x768.
Press MENU to use the OSD's PICTURE option.
7.
8. Under the PICTURE option select PC Settings.
9. Under PC Settings use AUTO ADJUST to adjust the screen.
Please Note:



HD display
HD display
For the best results, please set your PC resolution to 1366x768.
Please refer to the PC or graphic card's manual for further instructions
on how to set your resolution and refresh rate.
Please refer to your PC manual for video output requirements of the
video card.
The VGA port of the display features a power saving mode which will
automatically turn off the display, if there's no signal provided for more
than 10 minutes.
- 21 -
www.SCEPTRE.com
SCEPTRE X322BV-MQC User Manual
and your PC is turned off.
HD display
.
and your PC.