Connecting To A Pc With Vga And 3.5 Mm Minijack - Sceptre E408BD-FMQR User Manual

Connecting to a PC with VGA and 3.5 mm minijack ...

1. Make sure the power of HD Display and your PC is turned off.
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your
PC and the other end to the VGA port on the back of your HD Display.
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the
other end to the VGA Stereo Input port.
4. Turn on the power of the HD Display and your PC.
Use the remote control's source button or the source button on the
5.
Display to switch to PC.
6. Change your PC resolution to 1920x1080.
Press MENU to use the OSD's PICTURE option.
7.
8. Under the PICTURE option select PC Settings.
9. Under PC Settings use AUTO ADJUST to adjust the screen.
Please Note:



For the best results, please set your PC resolution to
1920x1080. Please refer to the PC or graphic card's manual
for further instructions on how to set your resolution and
refresh rate.
Please refer to your PC manual for video output requirements
of the video card.
The VGA port of the Display features a power saving mode
which will automatically turn off the Display, if there's no signal
provided for more than 10 minutes.
- 22 -
www.SCEPTRE.com
SCEPTRE E40 FHD Display User Manual