Maintenance Information; How To Identify Parts Of Vacuum Cleaner - Eureka AS5200 Series Owner's Manual

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

How to identify parts of vacuum cleaner

Handle
Stair and upholstery brush
(on some models)
Dust cup release button
Cover
Cyclone
Screen
Collar
Cyclone
assembly
Carpet height selector
Brush roll cover
(on some models)
Brush roll
Cord retainer
Power switch
Upper cord wrap
Power cord
Dusting brush
Handle release
2 Eureka Customer Service HELPLINE 1-800-282-2886
Moving parts! Assemble the vacuum cleaner before using.
Washable dust cup filters
Filter cover
HEPA filter HF16
U belt
Hose with wand
Crevice tool
Lower cord wrap
Air path selector knob

Maintenance information

Clean as needed to maintain suction
Wash screen Washable filters
Lift latch to open cover.
Twist to unlock
cyclone assembly
from cup.
Remove foam filter
from filter frame.
Rinse and dry
THOROUGHLY.
Twist and remove
collar to release
screen from cyclone.
Reinstal filters.
Rinse screen and dry
THOROUGHLY;
reassemble. until it clicks.
Never use vacuum without all filters in place.
Empty dust cup after each use
Press button Close bottom lid
to release bottom lid. until it clicks.
Debris will empty.
Replace within 6 months
HEPA filter HF16
Remove dust cup.
Twist HEPA cover
and lift off.
Replace HEPA filter
and cover.Turn to lock.
Close cover Snap dust cup
into place.
U BELT – Replace worn,
cut or out of shape belt
BRUSH ROLL
Clean monthly
www.eureka.com