A&D UA-651BLE Instruction Manual page 7

Symbols
The battery power indicator during
measurement.
Full Battery
The battery is low when it blinks.
Low Battery
Unstable blood pressure due to
movement during measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during the inflation.
The cuff is not applied correctly.
The pulse is not detected correctly.
PUL. DISPLAY ERROR
Blood pressure monitor internal error
Pairing has not been performed
correctly.
Pairng in progress.
Pairng complete.
Function / Meaning
English 6
Recommended Action
Replace all batteries
with new ones when
the mark blinks.
Take another
measurement.
Remain very still during
measurement.
Apply the cuff correctly,
and take another
measurement.
Remove the batteries
and press the START
button, and then install
the batteries again. If
the error still appears,
contact the dealer.
Remove and reinstall the
batteries. Try pairing again.