Standard Cmos Setup - ECS ST945GM User Manual

28

Standard CMOS Setup

This option displays basic information about your system.
System Date
System Time
Primary IDE Master
Primary IDE Slave
S-ATA 1
S-ATA 2
IDE BusMaster
System Date & System Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make changes
to the Windows Date and Time Properties utility.
IDE Devices
Your computer has one IDE channel which can be installed with one or two devices (Master
and Slave). In addition, this motherboard supports two SATA channels and each channel
allows one SATA device to be installed. Use these items to configure each device on the IDE
channel.
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Device
Vendor
Size
LBA Mode
Block Mode :16Sectors
PIO Mode
Async DMA :Multiword DMA-2
Ultra DMA
S.M.A.R.T.
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
Press <Esc> to return to the Standard CMOS Setup page.
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
Standard CMOS Setup
[Tue 08/15/2006]
[04 : 50 : 50]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Enabled]
Enter : Select +/-/: Value
: Move F10: Save
F2: Switch to next color
F9: Load Default Settings
Primary IDE Master
:Hard Disk
:HDT722516DLAT80
:164.76B
:Supported
:4
:Ultra DMA-2
:Supported
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
Enter : Select +/-/: Value
: Move
F2: Switch to next color
F9: Load Default Settings
Using BIOS
Help Item
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system time.
ESC: Exit F1: General Help
Help Item
Select the type
of device connected
to the system.
F10: Save ESC: Exit F1: General Help